CLAMPS & CLIPS
Bioprocess Clamps Pure-Fit ®
Press down to lock
Squeeze to release
61786 Pure-Fit ® TC Clamp Fits 1/8 inch to 3/8 inch OD Tubing (0.125 inch - 0.375 inch, 3.2 mm - 9.5 mm) Minimum Wall Section 0.03 inch (0.76 mm) PP
Also Available: Part No.
Measurement
Fits 1/8 inch - 3/8 inch OD Tubing (0.125 inch - 0.375 inch, 3.2 mm - 9.5 mm) Minimum Wall Section 0.03 inch (0.76 mm) Fits 3/8 inch - 3/4 inch OD Tubing (0.375 inch - 0.75 inch, 9.53 mm - 19.1 mm) Minimum Wall Section 0.06 inch (1.52 mm) Fits 3/8 inch - 3/4 inch OD Tubing (0.375 inch - 0.75 inch, 9.53 mm - 19.1 mm) Minimum, Wall Section 0.06 inch (1.52 mm)
61787
61788
61789
See page 226 for cable ties to permanently close
Cam-Lever
• While pressing the Red Push Button, pull the Cam-Lever back toward the hinge of the clamp
Red Push Button
• Pull the Lower-Member away from the Locking-Link
• Position the tube in the gate, as close as possible to the hinge of the clamp
• Push the Lower-Member to the desired position (“Flow” or “Stop Flow”) and rotate the Cam-Lever to the closed position
Locking-Link
Lower-Member
• The tubing is now held in the “Flow” position or locked in the “Stop Flow” position
61791 Pure-Fit ® TCL Clamp Fits 3/4 inch - 2 inch OD Tubing (0.75 inch - 2 inch, 19.1 mm - 50.8 mm) Tubing Range, Wall 1/18 -1/4 inch PVDF
Also Available: Part No.
Measurement
Fits 3/4 inch - 2 inch OD Tubing (0.75 inch - 2 inch, 19.1 mm - 50.8 mm) Tubing Range, Wall 1/16 -1/8 inch
61790
213
Customer Service +1 (631) 242 - 3000
Dimensions are for reference only
qosina.com • info@qosina.com
Powered by FlippingBook