CLAMPS & CLIPS Tubing Clamps Pinch
CLAMPS & CLIPS
Tubing Clamps Pinch
Press down to lock
Squeeze to release
61786 Pure-Fit ® TC Clamp Fits 1/8 inch - 3/8 inch OD Tubing
(0.125 inch - 0.375 inch, 3.18 mm - 9.53 mm) Minimum Wall Section 0.03 inch (0.76 mm) PP
72973 0.984 inch (25 mm) Sealing Length Acetal
72975 1.2 inch (30.48 mm) Sealing Length POM
Also Available: Part No.
The clamps below provide multiple levels of flow control
Measurement
Material
See page 226 for cable ties to permanently close Fits 3/8 inch - 3/4 inch OD Tubing (0.375 inch - 0.75 inch, 9.53 mm - 19.05 mm) Minimum Wall Section 0.06 inch (1.52 mm) Fits 1/8 inch - 3/8 inch OD Tubing (0.125 inch - 0.375 inch, 3.18 mm - 9.53 mm) Minimum Wall Section 0.03 inch (0.76 mm) Fits 3/8 inch - 3/4 inch OD Tubing (0.375 inch - 0.75 inch, 9.53 mm - 19.05 mm) Minimum Wall Section 0.06 inch (1.52 mm)
61787
PVDF
61788
PP
51640 PharmaLok ™ Tube Clamp Fits 1/2 inch - 1 1/4 inch OD Tubing
61789
PVDF
(0.5 inch - 1.25 inch, 12.7 mm - 31.75 mm) Nylon
Cam-Lever
Also Available: Part No. Measurement 51629
Image shown at 50%
• While pressing the Red Push Button, pull the Cam-Lever back toward the hinge of the clamp
Fits up to 3/4 inch OD Tubing (0.75 inch, 19.05 mm) Fits up to 2 1/2 inch OD Tubing (2.5 inch, 63.5 mm)
Pair with a non-reopening cable tie for a permanent closure
Red Push Button
51664
• Pull the Lower-Member away from the Locking-Link
See page 198 for cable ties to permanently close
• Position the tube in the gate, as close as possible to the hinge of the clamp
Locking-Link
• Push the Lower-Member to the desired position (“Flow” or “Stop Flow”) and rotate the Cam-Lever to the closed position
Lower-Member
51700 PharmaLok ™ Tube Clamp Fits up to 3/4 inch OD Tubing (0.75 inch, 19.05 mm) PBT
61791 Pure-Fit ® TCL Clamp Fits 3/4 inch - 2 inch OD Tubing (0.75 inch - 2 inch, 19.05 mm - 50.8 mm) Tubing Range, Wall 1/18 -1/4 inch PVDF Also Available: Part No. Measurement
• The tubing is now held in the “Flow” position or locked in the “Stop Flow” position
Also Available: Part No. Measurement
Fits 3/4 inch - 2 inch OD Tubing (0.75 inch - 2 inch, 19.05 mm - 50.8 mm) Tubing Range, Wall 1/16 -1/8 inch
Fits 1/2 inch - 1 1/4 inch OD Tubing (0.5 inch - 1.25 inch, 12.7 mm - 31.75 mm)
61790
51701
51702
Fits up to 2 1/2 inch OD Tubing (2.5 inch, 63.5 mm)
184
185
Customer Service +1 (631) 242 - 3000
Dimensions are for reference only
qosina.com • info@qosina.com
Customer Service +1 (631) 242 - 3000
Dimensions are for reference only
qosina.com • info@qosina.com
Powered by FlippingBook