ADHESIVES
ADHESIVES
Solution Guide CYANOACRYLATES FOR DEVICE ASSEMBLY
Solution Guide UV-CURABLE ADHESIVES FOR DEVICE ASSEMBLY
START
What type of material are you bonding?
START
What type of material are you bonding?
Elastomers
Plastic
Glass
Plastic
Metal
Thermosets
Thermoplastic Elastomers & Thermoplastics (e.g., PP, PE, Nylon, PS, HDPE, LDPE, TPU, PET/PETG)
Active Metals (e.g., Brass, Bronze, Copper, Steel)
Inactive Metals (e.g., Nitinol, Aluminum, Nickel, Stainless Steel, Titanium, Anodized Surfaces)
Thermoplastics
Thermosets
(e.g., PC, ABS, PMMA, PVC, Fiberglass, Phenolic)
(e.g., PP, PE, Nylon, PS, HDPE, LDPE, TPU, PET/PETG)
(e.g., PC, ABS, PMMA, PVC, Fiberglass, Phenolic)
Use with 6070 Primer for Increased Adhesion
Medium Viscosity
Medium to High Viscosity
Use with 6070 Primer for Increased Adhesion
Medium to High Viscosity
SOLUTION
6070
M2611
M2028
M2075
1
105
3
750
Viscosity (cPs) Shear Strength (psi) Temperature Range Fixture Time (seconds)
4035*
2700**
3320*
SOLUTION
6070
U304
U305
U307
-67°F to 203°F
-67°F to 203°F
-67°F to 203°F
1
1000 3000*
850
2000 700**
Viscosity (cPs) Shear Strength (psi) Temperature Range Fixture Time (seconds)
10
2
10
3000
-65°F to 200°F
-65°F to 200°F
-65°F to 200°F
175
400
275
SPECIALTY APPLICATION ADHESIVES
* Performance of cured adhesive on Polycarbonate **Performance of cured adhesive on Stainless Steel *** Performance of cured adhesive on Glass
Rubber-Toughened Cyanoacrylates
Low Odor, Low Bloom
Engineered for applications requiring vibration, shock, impact and/or heat resistance, as well as increased flexibility
For applications with aesthetic or fume requirements
Adhesives are not intended for use in the assembly of implantable devices
Low to Medium Viscosity
Low to Medium Viscosity
Low Viscosity
High Viscosity
SOLUTION
M2240-05
M5005
M5008
M5100
500
5
50
1000
Viscosity (cPs) Shear Strength (psi) Temperature Range Fixture Time (seconds)
2600***
2700***
2600***
5200*** -67°F to 266°F 25
For our full list of adhesive references, visit: qosina.com/medical-grade-adhesives
-67°F to 203°F
-67°F to 203°F
-67°F to 203°F
15
20
60
* Performance of cured adhesive on Polycarbonate, tested to ASTM 4501 ** Performance of cured adhesive on PETG, tested to ASTM 4501 ***Performance of cured adhesive on Stainless Steel Fixture time given is for the recommended substrate field (i.e., time for plastic recommendations are for plastic, metal are metal, and all specialty adhesives are shown for fixture time on metal.)
Adhesives are not intended for use in the assembly of implantable devices
158
159
Customer Service +1 (631) 242 - 3000
Dimensions are for reference only
qosina.com • info@qosina.com
Customer Service +1 (631) 242 - 3000
Dimensions are for reference only
qosina.com • info@qosina.com
Powered by FlippingBook